HIMCOHIMCO

Home Profile Contact Us Enquiry Products

Offset Disc Harrow/Disc Harrow/Border Disc Harrow

We are specialized in manufacturing of superior quality offset disc harrow, disc harrow & border disc harrow that cater to the requirements of agriculture industry. Our range is robustly constructed and is acclaimed for its long service life and least maintenance. Quality tested as per international standards, our range available in varied sizes and specifications to fulfill the diverse needs of clients.

Offset Disc Harrow HC - 101 

 Our range of offset disc harrows are fabricated from premium grade material using cutting edge technology. These harrows are designed for opening hard and tough soil for seed bed preparation and various other field operations.Our assortment of offset disc harrows are widely demanded, owing to their features of high durability, long service life and least maintenance.


     -   A drawn type of tillage Implement designed for opening hard and tough soil pulverizing soil for           seed bed preparation and various other field operations.        -  Two strong and sturdy frames to withstand the heaviest of the loads. The construction is all                      welded type. Working angle between the two gangs can be varied from 30 degree to 45 degree                     and can be locked to parallel position for transportation.       -  Heavy duty oil bath axle. Bearings are bush type made of sturdy cast iron material fully         lubricated for easy moving and sealed .against leakage and enterance of dirt etc. by means of         felt washers.
   -   Disc blades of High carbon steel duly heat treated for longer life fitted on a robust pipe spaced by          sturdy cast iron spools. 
   -   Heavy duty disc scrapers provided for mud proof action.      -   A sturdy drawbar is designed to suit all standard tractor drawbars and is hinged to ensure the         line of pull aligns with center of pull of the tractor.     -  A tray to carry ballast weights is fabricated at the back of rear gang for improved penetration.
SPECIFICATIONS  

HC-101 – 10 DISCS HC-101-12 DISCS HC-101-14 DISCS HC-101-16-DISCS
No. of Discs 10 12 14 16
Disc Spacing 225 mm. 225 mm. 225 mm. 225 mm.
Dia of Disc 610 mm. 610 mm. 610 mm. 610 mm.
Effective width 1145 mm. 1370 mm. 1600 mm. 1830 mm.
Height 940 mm. 940 mm. 940 mm. 940 mm.
   ( Subject to alteration without notice. )
Offset Disc Harrow HC - 101

Send Query

Disc Harrow (Wheel Type) HC-101 

We are a reputed name among the prominent manufacturers and exporters of the rugged constructed hydraulic offset disc harrow wheel type HC-101. Backed by its heavy weight and design, the harrow effectively works in breaking up clods with deeper penetration. Made from quality material, our assortment of hydraulic offset disc harrow wheel is featured with durability, long service life and least maintenance.

Specifications:

Size
Ranging from 16 discs to 32 discs.
Working Width Ranging from 1700 mm (5.5' app.) to 2800 mm (9' app.) according to different sizes of harrows.
Weight Ranging from 1000 kgs. app. to 1800 kgs. app. for 16 discs to 32 discs harrows respectively.
Disc Size 610 mm (24" app.) with square hole of 28.5mm
Disc Type Plain & cutway (scalloped), as required. - ISI marked, high carbon steel, duly heat treated for longer life.
Disc Spacing 228 mm (9 "app.)
Scraper Heavy duty mild steel scrapers provided with each disc for mud proof action.
Bearing Assembly Heavy duty, covered type, bearing spool assembly (bush type).
Wheels 2 wheels of 7.50x16 pneumatic tyres; standard make.
Hubs 2 stainless steel Hubs of heavy duty.
Bearings 2 taper roller type of standard make in each hub.
Lift Control Double acting hydraulic cylinder.
Gangs Both front & rear gang adjustable for angle.
Pressure Hoses Double wire braided high pressure hoses 3000mm (10' app.) & 610 mm (2' app.) long.
Paint 2 coats of red oxide primer and 1 of paint.
Disc Harrow (Wheel Type) HC-101

Send Query

Border Disc Harrow HC-505 

We offer a range of border disc harrows that are used in irrigation application to form drains for channelizing water in the desired direction. Manufactured from graded raw material, these are known for their robust construction, corrosion resistance and long working life. Our range is provided with wide range of height and width adjustments for ease of operations.

 

-             Building up of ridges for irrigation purposes  is done quickly and efficiently by this tractor mounted equipment.

 

-             It is used to form drains for channalising water in the desired direction.

 

-             Provided with wide range of height and width adjustments.

 

-             Saves labour and proves extremely useful in the cultivation of rice.

 

SPECIFICATIONS

 

Frame

- 1830 mm long strong square frame of 75 x 75 x 8 mm. angle. 

Disc

- 610,660 and 710 mm.

Bearings

- Each disc hanger  fitted with two heavy duty taper roller bearings. 

Hitching

- Can be mounted on any tractor fitted with 3 – point linkage.

Capacity

- (i) For Ridges : Can make ridges ranging from 300mm to 1250 mm. 

  width and 250 mm to 500 mm in height.

- (ii) For Drains : Using 250-500 mm ridge height, drain of any

   convenient width may be made.

Width and Height Adjustment

- Disc hangers are mounted on the main frame with four bolts. They can be easily slided on the frame to get desired width and rotated to get required height. 

Paint

- 2 coats of red oxide primer and 1 of paint

   

  ( Subject to alteration without notice. )

Border Disc Harrow HC-505

Send Query

Showcase

View all our products / services as a slide show.

Play Now

On Off

Products

Home | Profile | Products | Contact Us | Enquiry

Member IndiaMART.com© HIMCO, All Rights Reserved. (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited